HOMMY ENTERPRISE (XINHUI) CO., LTD.
13 - 32
1-4
）
Push the stirring shaft into the cylinder. To ensure the stirring shaft is located above the
transmission shaft position slightly turn the stirring shaft until it is on the correct position. If the
installation is correct, the stirring shaft will no extend to the cylinder.
USAGE METHOD
●
Usage method 1 (Remove:
Expansion tube, Mixer)
1. Remove expansion tube
Pull upward the expansion tube from
hopper.
2. Remove upper cover from mixer.
Pull upward the upper cover from the
mixer and take it away
●
Usage method 2 (Preparation
for cleaning)
Prepare a few qualified disinfectant, use
warm water and follow the manufacturer's
specifications.
● Clean all parts of the machine with
disinfectant by the adjusted ratio.
● Wipe all parts with clean and disinfected
towel after cleaning.
●
Usage method 3 (Installation
after cleaning)
1. Install stirring shaft.
Push the stirring shaft into the cylinder. To
ensure the stirring shaft is located above the
transmission shaft position slightly turn the
stirring shaft until it is on the correct position.
