12
23
KEYLESS DEVICE PROGRAMMING (OPTIONAL ACCESSORIES)
Activate the opener only when door is in full view, free of obstruction and properly adjusted. No
one should enter or leave garage while door is in motion. Do not allow children to operate push
button(s) or remote(s). Do not allow children to play near the door.
NOTE: Your new keyless entry must be pro-
grammed to operate your garage door open-
er.
Program the receiver to match additional
transmitter code.
Using the “LEARN” button:
1. Press and release the “learn” button (1) on
opener. The learn indicator light will glow
steadily for 30 seconds.
2. Within 30 seconds, enter a four digit person-
al identification number (PIN) of your choice
on the keypad (2), then press and hold the
ENTER button.
3. Release the button when the opener light
blinks (3). It has learned the code. If the light
bulb is not installed, two clicks will be heard.
NOTE: This method requires two people if
the keyless entry is already mounted out-
side the garage.
Using the multi-function door control:
1. Enter a four digit personal identification num-
ber (PIN) of your choice on the keypad, then
press and hold ENTER.
2. While holding the ENTER button, press and
hold the LIGHT button on the multi-function
door control.
3. Continue holding the ENTER and LIGHT but-
tons while you press the push bar on the
multi-function door control (all three buttons
are held).
4. Release buttons when the opener light blinks.
It has learned the code. If the light bulb is not
installed, two clicks will be heard.
1
2
1
3
4
2
LOCK
LIGHT
3
LOCK
LIGHT
Wireless fingerprint access system C379
(optional accessory)
Full instruction are available with this accessory.
Once you have enrolled your user into the C379 you
can program the unit into your opener.
Using the “LEARN” button:
1. Press and release the “learn” button (1) on opener.
The learn indicator light will glow steadily for 30 sec-
onds.
2. Within 30 seconds slide the cover of the C379 up
as illustrated (A). Swipe your finger on the reader
head at a steady speed (B) until the yellow LED
turns on (C).
3. When the opener light blinks. It has learned the
code. If the light bulb is not installed, two clicks will
be heard, ensure there are no obstructions in the
path of the door, then press the send button (D) to
test the door.
Programming C379 wireless fingerprint
Summary of Contents for HE60ANZ
Page 2: ......
