42
Hazard information
For secure operation, the device has to be installed
in a power distribution panel according to VDE
0603, DIN 43871 (low-voltage sub-distribution
board), DIN 18015-x. The installation must be
carried out on a mounting rail (DIN rail) according
to EN 60715. Installation and wiring have to be
performed according to VDE 0100 (VDE 0100-410,
VDE 0100-510 etc.). Please consider the technical
connection requirements (TAB) of your energy
supplier.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
The device may only be operated within domes-
tic environment, in business and trade areas as
well as in small enterprises.
If you use the device/system in a security applica-
tion it has to be operated in connection with an
UPS (uninterruptible power supply) in order to
bridge possible power failure.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
Summary of Contents for HmIPW-DRAP
Page 3: ...1 A I E H C D B V HmIPW DRAP V F G J ...
Page 4: ...2 24 V GND BUS 1 BUS 2 HmIPW DRAP ...
Page 5: ...3 4 ...
Page 6: ...6 7 5 ...