59
Operation
• The Wired Access Point is now set up and imme-
diately ready for use.
After the Wired Access Point has been set-up success-
fully, you can teach-in additional Homematic IP Wired
devices. For further information, please refer to the oper-
ating manual of the corresponding device.
If you are already using Homematic IP devices in
your smart home system or if you want to com-
bine your Homematic IP Wired devices with wire-
less Homematic IP components, you can also
connect the Homematic IP Wired devices to an
(installed) Access Point. Therefore, connect the
Homematic IP Wired Access Point to the (installed)
Homematic IP Access Point, as described in the
user manual.
8
Operation
Via the device push-buttons, the following operating
functions are available directly on the device:
• System button
(A)
(
see figure 5
)
• Mode button
(C)
(
see figure 6
)
• Select button
(D)
(
see figure 7
)
Display light
By pressing the system button briefly, you can activate
Summary of Contents for HmIPW-DRAP
Page 3: ...1 A I E H C D B V HmIPW DRAP V F G J ...
Page 4: ...2 24 V GND BUS 1 BUS 2 HmIPW DRAP ...
Page 5: ...3 4 ...
Page 6: ...6 7 5 ...