75
Additional functions in connection with HomeMatic Central Control Unit
on the display permanently. Operation of the device is
now locked.
•
To deactivate the operating lock, press both buttons
once again for at least 3 seconds.
In connection with the HomeMatic Central Control
Unit you can set two additional lock functions via
the WebUI user interface: the global and the mode
operating lock. Both advanced lock functions can
only be activated/deactivated via the WebUI (not via
the device itself).
17 Additional functions in connec-
tion with HomeMatic Central Con-
trol Unit
17.1 Switching time/date display
The factory setting will show the time on the display. The
display of date and time can be switched via the WebUI.
17.2 Maximum setpoint temperature
A maximum setpoint temperature of 30.5 °C is set in the
factory settings. The maximum setpoint temperature (15.0
to 30.5 °C) can be adjusted via the WebUI.
17.3 Minumum setpoint temperature
A minimum setpoint temperature of 4.5 °C is set in the fac-
tory settings. The minimum setpoint temperature (4.5 to
14.5 °C) can be adjusted via the WebUI.
