53
Start-up
are mounting the room thermostat must be clean, dry
and free of grease.
•
For mounting of the assembled room thermostat, attach
the adhesive strips to the back side of the mounting
plate
(K)
. You should be able to read the letters on the
back side (according to figure).
<PA66>
• Remove the protective film from the adhesive strips.
•
Press the assembled room thermostat with the back side
to the wall in the position where it should subsequently
be attached.
8.3.2 Screw mounting
•
Choose a site for installation.
•
Make sure that electrical lines in the wall will not be
damaged.
•
Position the mounting plate
(K)
on the desired site on
the wall. Make sure that the arrow on the mounting plate
is pointing upwards.
•
Use a pen to mark the positions of 2 bore holes
1
(di-
agonally opposite) in the mounting plate
(K)
on the wall.
The bore holes
2
can be used for installation with a
flush-mounting box.
