62
Teach-out/Restore factory settings
inbox. Here, you must configure the device and its associ
-
ated channels in order to make them available for operat-
ing and configuration tasks. Give the device a name and
assign it to a room. You can also make individual param-
eter settings.
Now you can use the „WebUI“ user interface to control
your device, configure it, connect it directly to other devic
-
es, or use it in central control unit programs. Please refer
to the „WebUI“ manual for more details (
you can find this in
the „Downloads“ area of the website www.homematic.com).
10 Teach-out/Restore factory set-
tings
The factory settings of the room thermostat can be re-
stored manually. Restoring the factory settings deletes all
settings and information about taught-in devices.
•
First remove the batteries from the battery compartment.
•
Press the three buttons (
) and re-insert the bat-
teries at the same time. Once “rES” is displayed, you
can release the buttons and the factory settings will be
restored.
Alternatively, you can restore the factory settings via
the configuration menu (see sec. „14.9 Restore
factory settings (rES)“ on p. 77).
