71
Manual operation
Heating in heat-
ing mode
P053
0
1
Heating in heating
mode deactivated
Heating in heating
mode activated
(default)
Selection of
heating system
P055
0
1
Standard floor
heating (default)
Low energy floor
heating
For further information regarding the configura-
tion, refer to the user manual of the Wall Thermo-
stat (HmIPW-WTH-2).
8
Manual operation
For installation and test purposes, the adaptation runs at
the individual heating zones can be restarted manually or
individual heating zones can be opened or closed.
To start the adapter run manually, proceed as follows:
• Select the required channel using the channel
button
(D)
(see figure 11)
.
• Press and hold down the select button
(C)
until the
open-end wrench appears in the display for the
selected channel (
see figure 11
).
If you want to restart the adaptation run for all
heating zones, you can also select all channels
using the channel button (press repeatedly until
