62
Start-up
The device LED
(A)
lights up green to indicate that
pairing has been successful. If pairing failed, the
device LED lights up red. Please try again.
• You can add the new floor heating controller to
other devices such as the wall thermostat or the
Multi IO Box. Simply activate the pairing mode of
the floor heating controller first and of the device
you want to pair afterwards. For further informa-
tion, please refer to the user manual of the corre-
sponding device.
6.5.3 Connecting to the Central Control Unit CCU3
To control and configure Homematic IP wired devices
software-based and comfortably as well as use it in cen-
tral control unit programs, you have to connect it to the
the WebUI. To connect the floor heating controller to the
Central Control Unit CCU3, proceed as follows:
• Set up your Central Control Unit CCU3 as de-
scribed in the operating manual and connect the
Homematic IP Wired Access Point.
• Start the user interface “Homematic WebUI” on
your computer.
• Click the “Teach-in devices” button on the right-
hand side of the screen.
