Satellite Dish Installation Manual (Ver. 1)
Section 4: Satellite Dish Assembly
Lay the dish flat to ensure it is not out of shape or damaged. Then attach the left
and right reflector brackets and hand tighten them using four (4) ¼” x ½” round
head bolts and ¼“ hex nuts.
Assemble the LNB Mast Bracket using two (2) ¼” x 2” round head bolts with ¼”
hex nuts on the sides and two (2) ¼” x 7/8” round head bolts with ¼” hex nuts on
the end of the bracket.
Then, attach the bracket to the dish using two (2) ¼” x 1” round head bolts and
¼” hex nuts on the top and bottom and one (1) ¼” x 1” bolt and ¼” hex nut on the
end of the LNB Bracket to secure the LNB after the dish has been mounted.
LNB Arm & Mast Bracket
LNB Arm & Mast Bracket
Mast Bracket Attached
LNB Clamp - Bracket LNB Clamp - Bracket
Tighten all nuts and bolts with the 7/16” ratchet wrench or socket. Insert the
plastic covers at the ends of the LNB Bracket, and set it aside.
Front View of Dish Rear View of Dish
Now let’s work on installing the Mast Bracket. Go on to
Section 5
(page 9) if you
intend to Wall-Mount it,
Section 6
(page 10) if you intend to Pole-Mount it and
Section 7
(page 12) if you intend to Roof-Mount it.
7
