should face the "5" o’clock position when look
the "5" o’clock position (see Figure 27).
Satellite Dish Installation Manual (Ver. 1)
Section 8: Attaching the Satellite Dish and LNB
Carefully lift the satellite dish you assembled earlier and place it over the pole so
it slips down (refer to Figures 24 and 25). Then slightly tighten the bolts.
Figure 24
Figure 25
Figure 26
Attach the LNB to the bracket (see Figure 26) and position the “F” connector at
The LNB should be placed in the middle of the bracket. The “F” connector
ing towards the front of the dish (see
Figure 27). The LNB must be placed in the center of the bracket (see Figure 28).
To optimize the signal quality, slide the LNB in both directions (as shown in
Figure 29) and find the peak signal (see Section 11 for Signal Measurement
information).
Figure 27 Figure 28 Figure 29
13
