- 6 -
Tools Required
A
Phillips
screwdriver,
A small flat head screwdriver,
A 1/4” e
lectric drill,
A pliers will be needed.
Locating the Appliance
Your new electric fireplace may be installed
virtually anywhere in your home. However,
when choosing a location, ensure that the
general instructions for safety are followed.
For best results, install out of direct sunlight , water or very damp air.
Power supply service must be installed within proximity of electric fireplace prior to finishing
avoiding reconstruction.
Try to avoid any conditions that may cause the fireplace to vibrate, which would result in the
automatically turning on or off of the fireplace itself.
Due to many different finish materials use on walls, it is highly recommended that you consult
your local builder before you install this fireplace in the wall.
Minimum Clearance to Combustibles
Sides.......................................0 inch
Floor........................................0 inch
Back........................................0 inch
Top (Mantel or TV)............8 inch min
Front.....................................36 inch
WARNING! Risk of Fire!
Keep electrical cords, drapery, furnishings
or other combustibles at least 3ft. (0.9 m)
from the front of the electric fireplace.
4. INSTALLATION INFORMATION
Summary of Contents for ZHX-36-027
Page 2: ......