HomComfort HCFTALOAK, Manual

Page: 5 / 32

-5-
Assembly
Before beginning assembly of product, make sure all parts are present. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
1. Locate 3 panels (C/E/F) and the door panel with door (H). Align holes in all panels and insert M6 X 20
bolts through M6 washer, then insert bolt/washer through holes. Loosely tighten with wrench. DO NOT OVER
TIGHTEN as you will need to adjust the panels to ensure proper alignment.
Note: Right and left panels (E/F) marked 1, 2 should match the door panel with door (H) marked 1, 2.
2. Attach the propane tank strap to the bottom plate (G) as shown.
3. Turn the door knob, open the door and attach the bottom plate (G) to the assembled side panels / door
panel using M6 X 30 bolts.
Note: Match panels and bottom plate as 3-3, 4-4, 5-5, 6-6.
H
E
C
F
G
G