HomComfort HCFTALOAK, Manual

Page: 7 / 32

-7-
8. Remove the rubber cap on the electronic igniter (L) by unscrewing and slide battery into the battery slot.
Make sure the positive side of the battery faces outwards. Screw the electronic igniter cap (L) over the
battery tightly.
9. Close the door and turn the door knob to hold the door shut. Fire pit assembly is now complete!
10. When the fire pit is not in use and has cooled completely, cover with the fire pit cover. CAUTION: Never place
the cover on a HOT fire pit. Fire pit must be cooled completely before covering.
11. Connect the hose and regulator to the cylinder. The propane gas and cylinder are sold separately. Use
a standard 20 lb. propane cylinder only. Attach regulator to cylinder. Complete attachment. Place the
cylinder inside the table as shown. Attach the cylinder to the base by running the tie down strap through the
handles at the top of the cylinder and click the buckles together. To release the straps for cylinder removal,
press the buttons on each side of the buckle to release. Be sure the cylinder is turned all the way off and
remove the regulator from the cylinder.
L