HOMCOM B41-009, Assembly Instruction Manual

Page: 2 / 10

IMPORTANT SAFETY OPERATING INSTRUCTIONS
1.
Please read all warnings and instruction labels which are included in the box and
fixture to avoid personal injury, property damage caused by fire, cuts, bruises,
death, and other dangers.
2.
Please follow these general precautions before installation or maintenance.
WARNING!
1.
When using product, basic precautions should always be followed.
2.
To avoid RISK of electrical shock, ALWAYS turn off or disconnect from
power while installing or servicing unit.
3.
Always insert or remove plug from the outlet by grabbing the plug by hand. Do
not pull on the power cord.
4.
Do not look directly at the LED lights for any length of time.
5.
Carefully read and understand the information given in this manual before
beginning installation. Failure to do so could lead to electric shock, fire, or
other injuries which could be hazardous or even fatal.
6.
This light fixture is NOT A TOY and is not suitable for use by children.
7.
We do not take responsibility if the instruction manual is not followed correctly
or if the product is handled improperly resulting in damage to person or
property.
PRECAUTIONS
1.
Before connecting to the power outlet make sure that the voltage indicated on the
rating label is compatible with the supply voltage
2.
This item is damp rated. NEVER submerge this product in water.
3.
Do not use on hot surfaces.
4.
Do not remove the lens protecting the LED.
5.
Do not use in areas near a gas source.
6.
It is NOT possible to change the LED light source.
7.
This light is not intended for use in potentially explosive environments. This is NOT
a vapor proof light.
8.
Under wet or damp conditions, use only GFCI protected circuits.
9.
Place the electrical cord away from busy areas to avoid accidental tripping and
contact.
10.
Place your light on a stable and level surface to avoid tipping or being knocked over
accidentally.
EN