Homa H 501 Series Installation And Operation Instruction Manual Download Page 13

 13 

10. Fault Finding Chart

 

Before maintenance or repair disconnect the pump 

from the power supply to avoid accidental starting of the 
pump! 
 

Fault Cause Remedy 

Motor does not start. 
Fuses blow or motor 
starter trips out immedi-
ately. Caution: Do not 
start again! 

 Supply failure; short-

circuit; earth-leakage; 
fault in cable or motor 
winding 

 Have the cable and 

motor motor 
checked and re-
paired by a qualified 
electrician 

 

 Fuses blow due to use 

of wrong type of fuse 

 Install fuses of the 

correct type 

 

 Impeller blocked by 

impurities 

 Clean the impeller  

 

 Level switch out of 

adjustment or defec-
tive 

 Check the level 

switch 

Pump operates, but 
motor starter trips out 
after a short while

 

 Low setting of thermal 

relay in motor starter 

 Set the relay in ac-

cordance with the 
specifications on the 
pump label 

 

 Increased current con-

sumption due to large 
voltage drop 

 Measure the voltage 

between two motor 
phases. Tolerance: 
± 10% (± 5% for ex-
plosion-proof 
pumps) 

 

 Impeller blocked by 

impurities. Increased 
current consumption in 
all three phases 

 Clean the impeller 

Pump operates at be-
low-standard perfor- 

 Impeller blocked by 

impurities 

 Clean the impeller 

mance and power 
consumption 

 Wrong direction of 

rotation (only 3 Ph-
pumps) 

 Check the direction 

of rotation and pos-
sibly interchange 
two phases (see 
section 6.4) 

Pump operates, but 
gives no liquid 

 Discharge valve 

closed or blocked 

 Check the discharge 

valve and possibly 
open and/or clean 

 

 Non-return valve 

blocked 

 Clean non-return 

valve 

 

 Air in pump 

 Vent the pump 

Pump cycling between 
start and stop 

 Level switch out of 

adjustment or defec-
tive 

 Check the level 

switch 

 
 
 

 
 
 

We grant for the described product in the warranty receipt a war-
ranty of declared duration in the warranty receipt. The warranty 
starts with the first start up, latest with the day of sale. A warranty 
claim can be raised only by presentation of the fill in warranty 
receipt together with the purchase receipt. 
Our warranty extends only the removal of material defects or 
production defects. Costs for removal and installation of the 
complained product at the installation place, costs for the ride of 
the mechanicians to the location and from the installation place 
as well as costs for transport are not components of our war-
ranty. Complains caused by installation faults or operating faults, 
unsuitable operation conditions, deficient care or improper efforts 
of repair are out of the question of warranty as well as normal 
wear. Hereby arised costs, especially costs for checking and 
transport are bearing by the sender or operator of the pump. This 
is also valid for an asserted warranty claim if a check results that 
the unit works faultless and is free of defects. All products have a 
high quality standard. Each product is defeated by a streng tech-
nical end control before delivery. If the unit still gives an occasion 
for a legitimated complain, you have the claim of an appropriated 
correction free of charge. Warranty repairs only must lead from 
the manufacturer or an authorized agency. Trials of repair by the 
customer or non-authorized persons during the warranty, causes 
an extinguishing of the warranty. A warranty repair achieved by 
us does not extend the warranty period. Replaced spare parts 
give no reasons for a new  warranty period. Extensive claims are 
excluderd, especially such as diminution, change or compensa-
tion also for any kind of follow up damages. 
 
To guarantee a quick transaction of a warranty claim, please re-
turn the product together with the warranty receipt, purchase re-
ceipt and declaration of defect carriage paid to the manufacturer 
(for the adress see warranty receipt). 
 
Claims caused by damages of transport could be only accepted, 
if the damage is established or confirmed by delivery in the pres-
ence of the forwarder, parcel service, train or post. 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

Pump type 

 

 

 

 

 

 
No.  

 

 

 

 

 

 
Correspond to our warranty conditions 
we achieve 
 
 

 

12 months of warranty 

 
 
 
 
 
 
 
 
 

HOMA Pumpenfabrik GmbH 
Industriestraße 1 
D-53819 Nk.-Seelscheid 
Telefon:  + 49 (0) - 22 47 - 70 20 
Telefax:  + 49 (0) - 22 47 - 7 02 44 
Train station: D-53819 Nk.-Seelscheid 

Warranty receipt

 

Warranty Conditions

 

Summary of Contents for H 501 Series

















Reviews: