Spare parts
DKS 504 Vario | Version 1.03
19
11.3 Disposal of lubricants
The manufacturer of the lubricant makes the disposal in-
structions for the used lubricants available. If applicable,
ask for the product-specific data sheets.
11.4 Disposal via municipal collection points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sys
-
tem for these appliances).
The symbol on the product or its packaging indi
-
cates that this product should not be treated as normal
household waste, but must be returned to a collection
point for the recycling of electrical and electronic equip
-
ment. By helping to properly dispose of this product, you
are protecting the environment and the health of others.
Environment and health are endangered by improper
disposal. Material recycling helps to reduce the con
-
sumption of raw materials. For more information about
recycling this product, contact your local community, mu
-
nicipal waste management, or the shop where you pur
-
chased the product.
12 Spare parts
12.1 Ordering spare parts
The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for spare part or-
ders:
- Type of device
- Serial number
- Position number
- Quantity
- Year of manufacture
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indica-
tions regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find indications regarding the device type, item
number and year of manufacturing on the type plate
which is fixed on the device.
Example
The drive belt for the Jig Saw DKS-504 Vario must be or
-
dered. The drive belt has the number 95 in the spare
parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (drive belt) and marked
positon number (95) to the dealer or spare parts depart
-
ment and provide the following information:
- Type of device:
JIG SAW DKS 504-Vario
- Item number:
5902504
- Drawing number:
1
- Position number:
95
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non admitted spare parts are being used.
