16
DKS 504 Vario | Version 1.03
Care, maintenance and overhaul/re-pair
8.5 Change the tools
Step 1: Loosen the screw in the hole in the handle.
Step 2: Turn the clamping nut until the spindle lock enga
-
ges and the shaft does not turn.
Fig. 22: Change the tool
Step 3: Insert the required tool and tighten the collet with
the supplied key.
Step 4: Remove the tool.
8.6 Working with the hand tool
Observe the following notes when working with the
hand tool:
- Once the tool is connected to the scroll saw and
the scroll saw is turned on, the tool also turns on.
Therefore, make sure to hold the tool firmly and se
-
curely when turning on the scroll saw.
- Secure the workpiece which you are working on to
avoid slippage.
- Hold the tool firmly in your hand and always at a
safe distance from other persons.
- Keep children away from the scroll saw and hand
tools.
- Always aim the tool away from your body.
- The slow speed is best for polishing, delicate wood
carving or working on fragile model parts.
- A high speed is suitable for operation on hardwo
-
ods, metals and glass, eg. As carving, milling, mol
-
ding, cutting and drilling.
- Only put the hand tool out of hand as soon as the
tool stops turning.
- Disconnect the separate tool immediately after use
from the scroll saw, otherwise injury to the opera
-
tor.
9
Care, maintenance and overhaul/re-
pair
NOTE!
First insert the shaft of the connection cable into the
connection to the Jig saw and then tighten the
connection.
DANGER!
Disconnect the separate tool immediately after use
from the scroll saw, otherwise injury to the operator.
DANGER!
To avoid the risk of injury, make sure that the blade
guard is mounted over the saw blade when using the
hand tool.
DANGER!
Electric shock is life-threatening!
There is a danger of life in case of contact with cur-
rent running through components.Electrical compo-
nents that are on can cause uncontrolled movements
and lead to the most serious injuries.
- Always disconnect the mains plug before you start
cleaning and maintenance works.
- Connections and repairs of the electrical equipment
may only be carried out by specialized electrical
staff.
