Holzmann FS 200SF, Manual

Page: 12 / 44

www.holzmann-maschinen.at
When installing a new cutter, keep
the unused segment of the cutter
below the table.
Adjust the guides as near as possible
to the cutter
After installing a new cutter, always rota-
te the spindle - with the machine being
unplugged - by hand in order to check
that the cutter runs freely and does
not touch any machine part.
Always ensure that the cutter, the fence,
the spindle height and tilt and all other
adjustable components are fixed and
tightened properly before operation.
Do not forget to unblock the spindle
after installing a new cutter.
Use only cutters that are certified
and comply with the machines tech-
nical requirements like max. diameter,
spindle diameter and especially check
whether the cutter is designed for the
spindle rotation speed of the milling ma-
chine.
Always feed the work towards the
cutter in the direction opposite of the
cutter rotation.
Your hands must not come nearer
than 12 inches (~ 30cm) to the cut-
ters . Never reach directly across or over
the cutters. Never reach behind the cut-
ter to grap the workpiece.
Beware of material kickbacks! The
danger of kickbacks is increased when:
the workpiece has knots, holes or foreign
objects in it. Warped or uneven workpie-
ces should be planed before shaping or
profiling them with the spindle moulder.
Never force a workpiece through the
shaper when feeling resistance - high
danger of kickback! Let the cutters do
the work and reduce the feeding speed.
Keep your cutters evenly sharp. Blunt or
uneven cutters increase kickback proba-
bility dramatically.
Never attempt to remove too much
material in one pass. You will enjoy
better working results and a higher safe-
ty level if you split the work into multiple
passes.
SPINDLE MOULDER SAFETY RULES
The workplace must have:
sufficient lighting conditions to prevent
shadows or eye strain.
access to a suitable dust collecting sys-
tem!
a clean, level underground that is vibra-
tion resistent!
enough place around the machine for safe
handling and feeding of the material.
A proper, compatible electric supply cir-
cuit.
Humidity: max. 90% for max. 25°C
max. 70% for max. 40°C
height above sea level: max. 1000m
Do not use the machine outdoors.
Do not use the machine in workplaces
with explosion and fire hazard.
The work with a spindle moulder always
contains a certain risk that can never be
eliminated entirely. This is a non comple-
te shortlist indicating some of the most
dangerous remaining residual risks:
Risk of personal injury due to workpiece
kickback.
Risk of injury through rotating cutter-
heads.
Risk of electrocution when touching lea-
ding machine components.
You can minimize these residual risks by
following all security, maintenance and
operation rules.
Any use that does not comply with the
security rules, workplace requirements,
maintenance guidelines or operation ru-
les described in this manual.
HOLZMANN Maschinen cannot be made
liable for any damages to machine and
person being a direct or indirect conse-
quence of inproper use of the machine.
WORKPLACE REQUIREMENTS
INAPPROPRIATE MACHINE USAGE
RESIDUAL RISKS
ENGLISH