HOLZMANN MASCHINEN KAM215EPSV, User Manual

Page: 3 / 114

INHALT /INDEX / ÍNDICE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 3
KAM215EPSV
8.4.4 Fehlermeldung Notausschalter-Alarm ............................................................. 28
8.4.5 Sonstige Fehlermeldung ................................................................................ 29
9 REINIGUNG, WARTUNG, LAGERUNG, ENTSORGUNG 30
9.1 Reinigung 30
9.2 Wartung 30
9.2.1 Instandhaltungs- und Wartungsplan ............................................................... 30
9.2.2 Fräserwechsel (Fügeaggregat) ....................................................................... 31
9.2.3 Sägeblattwechsel ......................................................................................... 32
9.2.4 Polierscheibenwechsel .................................................................................. 32
9.3 Lagerung 33
9.4 Entsorgung 33
10 FEHLERBEHEBUNG 33
11 PREFACE (EN) 34
12 SAFETY 35
12.1 Intended Use of the Machine 35
12.1.1 Technical Restrictions ................................................................................... 35
12.1.2 Prohibited Use / Forseeable Misuse................................................................. 35
12.2 User Requirements 35
12.3 Safety Devices 36
12.4 General Safety Instructions 36
12.5 Electrical Safety 36
12.6 Special Safety Instructions for that machine 37
12.7 Hazard Warnings 37
13 TRANSPORT 38
14 ASSEMBLY 38
14.1 Checking Scope of Supply 38
14.2 The workplace 38
14.3 Assembling the machine 38
15 ELECTRICAL CONNECTION 40
15.1.1 Establishing a 400 V connection ..................................................................... 40
15.2 Connecting to a dust collection system 41
15.3 Connecting to a compressed air supply 41
16 OPERATION 41
16.1 Preparatory activities 41
16.1.1 Filling with glue granulate ............................................................................. 41
16.1.2 Inserting the edge band into the edge band feed ............................................. 42
16.1.3 Adjusting the height of the edge band ............................................................ 42
16.1.4 Pressure regulator settings for cutter unit edge band / contact pressure ............. 42
16.1.5 Pressure regulator settings for edge band saw ................................................. 42
16.1.6 Setting the milling cut-off ............................................................................. 43
16.1.7 Setting edge band saw angle ......................................................................... 43
16.1.8 Setting double trimming unit ......................................................................... 44
16.1.9 Setting flat scraper ....................................................................................... 44
16.1.10 Setting polishing unit .................................................................................... 44
16.1.11 Setting workpiece height ............................................................................... 45
16.1.12 Setting workpiece plate support ..................................................................... 45
16.2 Operation 45
16.2.1 Starting the machine .................................................................................... 45
16.2.2 Setting the glue temperature ......................................................................... 46
16.2.3 De/Activation of the units.............................................................................. 46
16.2.4 Edge banding process ................................................................................... 46
16.2.5 Activate emergency stop / switch off the machine. ........................................... 47
16.3 Fine adjustment of parameters for desired edge result 47
16.3.1 Glue quantiy adjustment ............................................................................... 47
16.3.2 Basic setting Adjusting the workpiece feed ...................................................... 47
16.3.3 Adjustment edge band saw (edge section) ...................................................... 48
16.4 Error message and parameter settings 49