2
TKS-Z 400 | Version 1.01
Imprint
Product identification
Circular saw
Item number
TKS-Z 400
5741400
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax:
0049 (0) 951 96555 - 55
E-Mail:
Internet:
www.holzkraft.de
Indications regarding the operating instructions
Original operating instructions
Edition:
29.07.2019
Version:
1.01
Language: English
Author:
FL
Indications regarding the copyright
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions is the sole
property of the company Stürmer Maschinen GmbH.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Contents
Imprint...................................................... 2
Contents .................................................. 2
1 Introduction ............................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer ........................................................... 3
2 Safety ....................................................... 3
2.1 Legend of symbols.............................................. 3
2.2 Obligations of the operating company ................ 4
2.3 Requirements to staff.......................................... 5
2.4 Personal protective equipment ........................... 5
2.5 Safety labels on the Circular saw ....................... 6
2.6 General safety information.................................. 6
2.7 Safety devices .................................................... 7
3 Inteded Use.............................................. 7
4 Residual risks.......................................... 8
5 Technical Data......................................... 8
5.1 Type plate ........................................................... 8
6 Transport, packaging, storage............... 9
6.1 Delivery and transport......................................... 9
6.2 Packaging ........................................................... 9
6.3 Storage ............................................................... 9
7 Description of the device ..................... 10
7.1 Scope of delivery .............................................. 10
7.2 Accessories ...................................................... 10
8 Setting up and connecting ................... 10
8.1 Requirements for the installation location......... 10
8.2 Set up the Circular saw..................................... 11
8.3 Settings............................................................. 12
8.4 Electrical connection......................................... 14
9 Operation of the Circular saw ............. 15
9.1 Saws with longitudinal stop............................... 16
9.2 Saws with cross stop ........................................ 16
9.3 Lift cutting ......................................................... 17
9.4 Cutting chamfers............................................... 17
9.5 Make a miter cut ............................................... 17
10 Care, maintenance and repair ............ 17
10.1 Care after work ............................................... 18
10.2 Maintenance and repair .................................. 18
11 Troubleshooting.................................. 19
12 Disposal, reusing used machines ..... 19
12.1 Decommissioning ........................................... 19
12.2 Disposal of electrical equipment ..................... 19
12.3 Disposing of lubricants.................................... 19
13 Spare parts .......................................... 20
13.1 Ordering spare parts....................................... 20
13.2 Spare parts drawing........................................ 21
14 Electrical circuit diagram ................... 23
15 EC-Declaration of Conformity............ 24
16 Notes .................................................... 25