10
TKS-Z 400 | Version 1.01
Description of the device
7
Description of the device
Illustrations in these operating instructions may de-
viate from the original.
Fig. 8: Circular saw TKS-Z 400
1 Blade safe guard
2 Blade safe guard holding bracket
3 Blade safe guard adjust lever
4 Rip fence
5 Rip fence rail
6 Saw blade
7 Power switch
8 Hoist ring
9 Machine carrier lever
10 Blade tilting lock knob
11 Wheel kit
12 Tool kit
13 Emergency stop (above) / Workpiece roller (below)
14 Motor switch (above) / Workpiece roller (below)
15 Emergency stop (above) / Infeed roller support
(below)
16 Infeed roller support guide
17 Outroller support A
18 Outroller support B
19 Outroller support C
20 Wheel kit for outroller
21 Rip fence for outfeed
22 Stop for outfeed
23 Stop for Infeed
24 Rip fence for Infeed
7.1 Scope of delivery
- Chassis
- Saw blade guard with suction connection
- Push stick
- Toolbox
- Carbide saw blade 400 x 4.0 x 30 mm, Z 28
- Operating tool
7.2 Accessories
- Transport Set
Item number: 5741404
- HM-Saw blade 400x30x4 mm , Z28
Item number: 5741405
- Saw blade 400x30x3,5 mm , Z36
Item number: 5264036
- Saw blade 400x30x3,5 mm , Z96
Item number: 5264096
8
Setting up and connecting
8.1 Requirements for the installation location
The saw must be placed securely on a level and firm sur
-
face. Ensure that there is sufficient freedom of move
-
ment for working. The installation location should meet
the following criteria:
- The substrate must be level, firm and vibration-
free.
- The substrate must not let any lubricant through.
- The installation or working room must be dry and
well ventilated.
- Do not operate machines that cause dust and
chips near the machine.
- There must be sufficient space for the operating
personnel, for material transport as well as for ad
-
justment and maintenance work.
- The site must have good lighting.
- There must be a suction device with min. 690 m3 /
h extraction capacity, min. 20 m / s flow velocity at
the suction connection; Hose diameter 100 mm,
max. Hose length 4 m.