Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 17 -
12.2.3
Configuration menu
to call with:
to quit with:
Is a chip card type 83 non-existing, you can start the menu also
with change over the DIP switches no. 1, 2 and 3 on "on".
If the programming is finished, you must change only DIP switch
no. 1 and 2 on "off".
Following menu options are successively programmable:
insert chip card
type 83
pull out chip card
type 83
Display ad
Factory setting
Description
Language*
German
The language offers the possibility to set the typical country language. The
language selection depends on the software and it is may be chosen between
version A, B, C. It must be denoted by order.
It can be selected following:
Version A: German, French, Italian, Flemish
Version B: English, Norwegian, Danish, Swedish
Version C: Polish, Spanish, Croatian
Coin tester value
chan. X
The setting of the channel values offers the possibility to set value of the inser
-
ted coin/s – for the DUO – individually. It is already factory set and adjusted to
the built coin tester and may only be readjusted for the reasons given below:
● If a coin tester for foreign currency has been built in.
●
If the value of the token should be changed.
Coin tester value
chan. 1
The coin tester revaluation Channel 1 offers the possibility to set the channel
value for channel 1. The valuing can be set in 0,1 steps from 0,0 – 25,5. With
the RESET- and PLUS button you can change the values, with the OK button
you can switch over to the next menu point.
By setting from 0,0 the coin tester will accept the coins but there will be
no time buying! If the coin should be blocked, this change should be set
up in the coin tester.
Coin tester value
chan. 2 … 6
Analogue coin tester revaluation channel 1
* The language selection is dependent from the respective software version.
By trespassing the configuration menu do not change
any values! Uncontrolled programming can´t be follow-
ed by your wished functions. In the worst case the de-
vice can be put out of function totally.
Setting the channel on the EMP 800.00 v 6
Your DUO has been equipped with an electronic multi coin ac
-
ceptor (EMP). It can recognise up to 6 different types of coins.
When a coin has been inserted, it only realises that a coin has
been inserted but it does not which value the coin should have.
The evaluation is helped by the channel value program.
The allocation of the channels to the thrown in coins can be in
-
ferred from the sticker on the side cover of the electronic multiple
coin acceptor. There is the possibility of closing individual chan
-
nels. Thus the coin acceptance is blocked.
