TLi
IQ
System User Manual
6 – 4
Section 6 – Printer
REMOVING AN EMPTY LABEL ROLL
When the printer is out of labels, the green power light will flash.
1. Leave the printer turned on and open the cover. The last label on the roll may be connected to the corrugated core by
a piece of tape. If it is, use scissors to cut the label between the roll and the label feed slot. Remove the label spool
from the printer.
2. Press the Form Feed button on the printer's front panel to eject the remaining label stock from the printer.
3. Slide off the right side of the spool and remove the corrugated core.
4. Load a new roll of labels (see Loading Printer Labels for instructions).
Summary of Contents for TLi IQ
Page 1: ...User Manual System...
