Hologic SUPERSONIC IMAGINE AIXPLORER MultiWave, Cleaning Instruction Manual

Page: 8 / 22

Cleaning and Disinfecting the
Barcode Scanner
Maintenance
Cleaning the Scanning Window
Reading performance may degrade if the scanner's window is not clean.
If the window is visibly dirty, or if the scanner isn't operating well, clean
the window with a soft cloth or lens tissue dampened with water (or a
mild detergent - water solution). If a detergent solution is used, rinse with
a clean lens tissue dampened with water only.
Cleaning the Scanning Housing
The HS-1M is IP54 rated when the cable is attached. This means that
liquids and dusts will not penetrate into the housing. However, the
scanner should not be submerged in water or other liquids. It is also good
practice to dampen the cleansing cloth vs. spraying the scanner directly.
The HS-1M housing is compatible with the following medical grade
cleaners:
• Sani-Cloth® HB
• Sani-Cloth® Plus
• Hydrogen Peroxide
• CaviWipes™
• 409® Glass and Surface Cleaner
• Windex® Blue
• Clorox® Bleach (100%)
• Isopropyl Alcohol
• Gentle dish soap and water
CAUTION
Do not submerge the HS-1M in water.
Do not use abrasive wipes or tissues on the HS-1M's window - abrasive
wipes may scratch the window.
8