Hologic SUPERSONIC IMAGINE AIXPLORER MultiWave, Cleaning Instruction Manual

Page: 5 / 22

Cleaning the Exterior of the Machine
The exterior of the system should be periodically cleaned with a soft
cloth, lightly moistened with water and a gentle soap. This includes the
system chassis, control panel and handles. Be sure to clean any unused
gel from the surface of the control panel after system use.
The products below have been tested and found to be compatible with
SuperSonic Imagine Aixplorer®.
Solution Manufacturer Cleaner/
Disinfectant
Active ingredient
Sani-Cloth Active PDI Cleaner
Disinfectant
Quat. Ammonia
Sani-Cloth Af3 PDI Cleaner
Disinfectant
Quat. Ammonia
Cleaning the Monitor
A clean, soft cotton cloth dampened with an ammonia-based window
cleaner should be used to clean the Monitor display. Do not use paper
towels, as these may scratch the display monitor. The cleaning agent
should be sprayed onto the cloth, not directly onto the display surface.
Take care not to get any cleaning agent into the housing of the system.
This may lead to system damage.
Cleaning the Touch Screen Display
A clean, soft cotton cloth dampened with an ammonia-based window
cleaner should be used to clean the Touch Screen display. Do not use
paper towels, as these may scratch the display monitor. The cleaning
agent should be sprayed onto the cloth, not directly onto the display
surface. Take care not to get any cleaning agent into the housing of the
system. This may lead to system damage.
5