Holmatro PCT50, Manual

Page: 54 / 195

EN
54 916.400.139_002 PCT50
8.4 Maintenance schedule
/i
8.5 Maintenance activities
8.5.1 General
• After every use:
1. Check the battery pack for damage and function.
2. If the battery pack is damaged or does not function correctly, replace the damaged battery pack.
3. Check the operation of the unit.
4. Check the unit for damage and leaks. If the unit doesn't work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.5.2 Carrying handle
• Check the carrying handle for damage. Replace a damaged carrying handle.
8.5.3 Deadman’s handle
• Check whether the deadman's handle returns to the neutral position.
• Check the operation of the deadman's handle. Have the Holmatro dealer repair the deadman's
handle if it does not function properly.
8.5.4 Blades
See Fig. 7.
Time interval
Ob
ject
Actio
n
Af
te
r every u
se
Every mo
nth
or af
ter
first 10
wo
rking
hou
rs
Every 3 mo
nt
hs o
r
af
te
r
every 25 workin
g h
ours
Y
early
o
r
af
ter
every
10
0
w
o
rking hours
Battery pack Check x
Recharge x x
Light Check x
Holmatro
dealer
m
aintenance
1
.
1. The equipment must be thoroughly inspected, checked, set and tested. We recommend to
have this extensive maintenance performed by the Holmatro dealer (see also section 1.7).
Blades Check, clean, lubricate x
Snap ring of hinge pin Check x
Centre bolt Lubricate x
Hinge pins Lubricate x x
Accessories and lock pins Check x
Lubricate x
Carrying handle Check x
Deadman’s handle Check x
On-tool charge cable Check x