Holman WS5056C Instruction Manual Download Page 8

Daily alarm on/off

When in the mode of A1:

• 

 Press “- “ to activate the alarm 1 

• 

 Press “-“   twice cancel the alarm 1.

• 

Follow the same setting for alarm 2.

Information:

• 

The clock automatically changes from set-up mode to time mode if  

 

no keys are pressed  for 20 seconds.

• 

The alarm sounds for 2 minutes if no key is pressed to stop it. 

Snooze function

To activate the snooze function, follow the steps below

• 

Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate  

 

the snooze function.

• 

If the snooze function is activated, alarm symbol is flashing.

• 

The alarm repeat after 5 minutes.

• 

The snooze function can be stopped by pressing any key.

12/24 hours mode

The time display can be in 12hr AM/PM or 24 hour mode, please follow the 

manual set-up to select

°C/°F temperature display

The temperature display can be in °C or °F, please follow the manual set-up 

to select.

Max./ Min. for the indoor/outdoor temperature and humidity

Press “+“ for displaying of indoor/outdoor max./min. of temperature and hu-

midity, hold “+“for more than 3 seconds to clear up the max./min.

Trend arrow for the indoor/outdoor temperature and humidity

There are flat, up and down arrows for the trend of the temperature and hu-

midity

SNOOZE / TIME / TEMPERATURE 

Summary of Contents for WS5056C













Reviews: