OUTDOOR WEATHER VANE / INITIAL OPERATION
1. Wind Direction 2 .Solar panel 3. RF channel (hold for transmitting RF signal)
4. Rain gauge 5. UV index and LUX sensor 6. Level indicator ( to judge if set
up horizontally ) 7. ON/OFF for power 8. Built-in rechargeable battery 9.
Wind speed sensor 10. Metal pole 11. Cover for thermometer and hygrometer
Initial Operation
•
Charge the LIPO battery
•
Turn on the switch
•
After turning on the switch, the main unit will connect with the out-
door data collector by RF signal.
The RF signal symbol at the outside unit will flash.
•
This process takes about 3 minutes. Then the display shows the out
door temperature/humidity/wind speed/wind direction/rain fall/UV
index, in case of failure of reception, please press“OUT “for more
than 3 seconds to receive again.
1
9
10
11
8
7
2
3
4
5
6