INITIAL OPERATION / ALARM
Manual time set-up
Please Note:
The clock automatically changes from set-up mode to time display mode if no
keys are pressed for 20 seconds. Press and hold MODE key for 3 seconds to
get back to set up mode
•
Press and hold key “MODE“ for 3 seconds.
•
The 12hr/24hr will be flashing. Use “+ “ and “- “ to select
•
Press “MODE “ to confirm.
•
The DM(date/month/MD(month/date) will be flashing, Use “+ “ and “- “
to select
•
Press “MODE “ to confirm.
•
The display for the month will be flashing. Use“+ “ and “- “ to select
the month.
•
Press “MODE “ to confirm.
•
The display for the date will be flashing. Use “+ “ and “- “ to select
the date.
•
Press “MODE “ to confirm.
•
The display for the hour will be flashing. Use “+ “ and “-“ to select the
hour.
•
Press “MODE “ to confirm.
•
The display for the minutes will be flashing. Use “+ “ and “- “ to
select the minutes..
•
Press “MODE “ to confirm.
•
The C/F for temperature will be flashing, Use “+ “ and “- “ to select .
•
Press “MODE “ to confirm.
•
The hpa/inhg for air pressure will be flashing, Use “+ “ and “- “ to
select.
•
Press “MODE “ to confirm.
•
The mm/inch for rainfall and kmh/mph for wind speed will be flashing,
Use “+ “ and “- “ to select .
•
Press “MODE “ to confirm.
•
Please follow the above steps to choose individual settings, such as
12/24hour , C/F, languages etc.
Daily alarm set-up
•
Press “MODE” to switch from time display to A1 display
•
Press and hold the key “MODE” for 3 seconds ,the alarm time is
shown
•
The hour display of the alarm time is flashing. Use “+ “ and “- “ to
select the hour
then follow with the minutes. Use “+ “and “- “ to select.
•
Press “MODE” to confirm.
•
Follow the same setting for A2.