B U L L E T I N # 1 1 9 4 G L V - 4 0 D 1 G E A R L E S S T R A C T I O N M A C H I N E
Page 7-9
Rev. A - 04/01/2022
7. Adjust the guide screw sleeve of guide screw 2 and the mounting bolt of insulation bolt
1, so that the air gap between the armature of armature 5 and the armature of armature
iron 4 is between 0.012” (0.30 mm) to 0.022” (0.55 mm), the gap between the brake belt
and the brake wheel is 0.004” (0.10 mm) to 0.006” (0.15 mm), and the distance between
the guide screw sleeve of guide screw 2 and the iron surface of armature iron 4 is about
0.197” (5 mm). no less than 0.118” (3 mm) under any conditions, as shown in Figure 33.
Brake Adjustment
After installation of the brake, please refer to Section 5.3 to confirm brake is centered and air
gap has been restored to factory specifications
WARNING:
Brakes must be burnished to achieve full stopping torque!
Figure 33
1) INSTALLATION BOLT
2) GUIDE SCREW
3) BRAKING PAD
4) ARMATURE IRON
5) ARMATURE
