B U L L E T I N # 1 1 9 4 G L V - 4 0 D 1 G E A R L E S S T R A C T I O N M A C H I N E
Page 7-2
Rev. A - 04/01/2022
Encoder Removal
The encoder can be removed from the front of the machine. See Figure 16.
Figure 16
1. Loosen the encoder locking screw M2.5, as shown in Figure 17 with hex wrench (2 mm)
through the encoder cover hole. The screw does not need to be removed.
Figure 17
2. Remove the encoder bolt cover using the hex wrench (4 mm) and the encoder cable
protective cover. See Figure 18.
Figure 18
