MG1-1
®
COMPANION GRILL OWNERS MANUAL
• IF YOU SMELL GAS:
1. SHUT OFF GAS TO THE APPLIANCE.
2. EXTINGUISH ANY OPEN FLAME.
3. OPEN LID.
4. IF ODOR CONTINUES, IMMEDIATELY CALL YOUR GAS
SUPPLIER OR FIRE DEPARTMENT.
• DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE.
• AN LP CYLINDER NOT CONNECTED FOR USE SHALL NOT BE
STORED IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
• THE GRILL SHOULD BE LIT AND ALLOWED TO OPERATE FOR AT
LEAST 30 MINUTES BEFORE USING FOR THE FIRST TIME TO
ALLOW PRESERVATIVE TO BURN OFF. AFTER SMOKE STOPS
COMING OUT OF STACKS, GRILL IS READY FOR YOUR USE AND
ENJOYMENT.
• THIS GRILL IS NOT FOR COMMERCIAL USE
• THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND
SHALL NOT BE USED IN A BUILDING, GARAGE OR ANY OTHER
ENCLOSED AREA.
• EXCESSIVELY WINDY OR COLD CONDITIONS MAY AFFECT
GRILL COOKING PERFORMANCE.
• CHOOSE ONLY A LEVEL LOCATION FOR GRILL OPERATION. THE
HOLLAND GRILL MUST BE SITTING SECURELY ON A LEVEL
SURFACE FOR PROPER OPERATION AND EVEN HEAT
DISTRIBUTION.
• YOUR GRILL IS MADE FOR OUTDOOR USE ONLY
• THE VENT STACKS MUST BE IN THE “UP” POSITION DURING
GRILL USE.
• THE VENT STACKS AND THE AIR INTAKE OPENINGS SHOULD
NEVER BE BLOCKED OR CLOSED DURING GRILL OPERATION.
• A MINIMUM CLEARANCE OF 18 INCHES ON THE SIDES AND
BACK MUST BE KEPT BETWEEN THE GRILL AND COMBUSTIBLE
CONSTRUCTION. THE GRILL SHALL NOT BE LOCATED UNDER
OVERHEAD UNPROTECTED COMBUSTIBLE SURFACES.
• DO NOT STORE A SPARE LP GAS CYLINDER UNDER OR NEAR
THIS APPLIANCE.
Safety Information
Please read carefully.
Gas grills are used SAFELY by millions of people when following
simple SAFETY precautions.
The items in the fuel system are designed for operation with the
Holland Grill. They must not be replaced with any other brand.
(See parts list for replacement items.)
GAS BURNER: The gas burner is constructed of tubular stainless
steel and should not require maintenance other than inspection for
insects/nests inside the air intake slots.
BURNER VALVE/REGULATOR: The burner control is actually a
regulator/valve assembly. The regulator attaches directly to the end
of the burner, which extends out of the right end of the grill body.
The 1 pound PROPANE CYLINDER THREADS INTO THE REG-
ULATOR.
The burner control operates in the following positions indicated by
the pointer at the top of the regulator as installed on the grill:
OFF - This stops the flow of gas to the burner.
PUSH TO TURN ON - You must push “IN” on the knob to release
the knob from the locked “OFF” position.
LIGHTING POSITION - This position allows flow of gas to light
grill.
HIGH - This position provides the highest gas flow and hottest
cooking temperatures.
MED - This position provides cooking temperatures between
HIGH and LOW.
LOW - This position provides the lowest cooking temperatures.
ONLY A FACTORY SUPPLIED GAS VALVE/REGULATOR
SHOULD BE USED. See parts list for replacement items.
LP GAS REGULATOR CAUTION
The gas pressure regulator provided with this appliance MUST be
used. This regulator is equipped with the required orifice and is set
for the required outlet pressure for this appliance. This combination
of orifice size and pressure regulation specifications provides the
cooking performance intended by The Holland Company.
Substitution of regulator by any other device or any other manu-
facturer is dangerous and could result in serious injury. (See parts
list for replacement items.)
LP GAS REGULATOR
The gas pressure regulator is shipped loose and must be installed
prior to operating your grill. This is a “slip-fit” requiring no tools. See
assembly instructions for proper installation. The regulator may be
removed from grill after use. Turn the regulator control knob to the
“OFF” position, disconnect the LP cylinder and allow the grill to
cool for at least 30 minutes prior to removing regulator.
The Fuel System
Summary of Contents for BH-212-MG-1
Page 2: ......
