8
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
4.2. MEASURE RESISTANCE
- Put the red lead into the terminal, put the black lead to the COM terminal.
- The resistance measure will be auto matched.
- Touch the probes to the desired test points of the circuit to measure the resistance.
- Read the measured resistance on the display.
- is resistance is lower than 50Ω multimeter will automatically start continuity test and buzzer will beep.
4.3. TEST FOR CONTINUITY
- Put the red lead into the terminal, put the black lead to the COM terminal.
- The resistance measure will be auto matched.
- Touch the probes to the desired test points of the circuit.
- The built-in beeper will beep when the resistance is lower than 50Ω, which indicates a short circuit while the central LED light
will light.
4.4. TEST FOR NCV
- Push „SELECT” one times to enter the „NCV” Mode
- Pick up the tester and move it around, the built-in beeper will beep when the inner sensor detects AC voltage nearby. The stron-
ger the voltage is the quicker the beeper beeps while the central LED light will twinkle.
4.5 TEST FOR CAPACITANCE
- Connect the black test lead to the COM terminal and the red lead to the Terminal.
- Push „SELECT” two times to enter the Capacitance Mode
- Connect the red probe to the anode side and the black probe to the cathode side of the capacitor being tested.
- Read the measured capacitance value on the display once the reading is stabilized.
4.6. TEST FOR FREQUENCY
- Connect the black test lead to the COM terminal and the red lead to the Terminal.
- Push „Hz” bottom to enter the Frequency Mode
- Connect the test lead to the point to be measured of the circuit being tested.
- Read the measured Frequency value on the display once the reading is stabilized.
5. SPECIFICATIONS
5.1. TECH SPECIFICATIONS
Environmental Specifications
Operating
Temperature
0~40°C
Humidity
< 75%
Storage
Temperature
-10~50°C
< 75%
General Specifications
Display
4000 counts
Ture RMS
√
Ranging
Auto
Data Hold
√
Material
ABS
Backlight
√
Update Rate
2~3/s
Flashlight
√
Low Battery Indication
√
Auto Power Off
√
