10
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
Capacitance
6nF
1pF
±(3.0%+5d)
60mF
60nF
10pF
600nF
100pF
6uF
1nF
60uF
10nF
600uF
100nF
±(3.5%+5d)
6mF
1uF
±(5.0%+6d)
60mF
10uF
±(10%+8d)
6. FREQUENCY
Function
Range
Resolution
Accuracy
Max
Frequency
999.9Hz
0.1Hz
±(1.0%+5d)
20mHz
9.999kHz
1Hz
99.99kHz
10Hz
999.9kHz
100Hz
±(2.0%+5d)
9.999mHz
1kHz
±(3.0%+5d)
20.00mHz
10kHz
±(4.0%+10d)
6. Maintanance
6.1. Battery replacement
To avoid electric shock or injury caused by an incorrect reading, replace the battery immediately when the instrument display shows
the „
”. Before opening the battery cover and replacing the batteries, it is necessary to switch off and check whether the testers
have been disconnected from the circuit being measured.
Replace the battery according to the following steps:
1. Disconnect the power supply to the instrument.
2. Pull all test plugs out of the input socket.
3. Loosen the screws securing the battery cover.
4. Remove battery cover.
5. Remove old battery.
6. Replace with a new AAA 2 x 1.5 V battery.
7. Place the battery cover and tighten the screws.
6.2. Fuse replacement
1. Replace tester probes and turn off multimeter
2. Use screwdriver to open back cover and take out broken fuse
3. Replace fuse and screw back plate on place.
6.3. Maintanance
To clean device use soft cloth. Do not use solvents nor abrasives which could cause corrosion or damage of body.
