2
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
2. INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA
Multimetr cyfrowy HT1E600 został zaprojektowany zgodnie z dyrektywą IEC61010-1 600 V (CATIII) i poziomem zanieczyszczenia 2.
Aby zapewnić prawidłowe i bezpieczne użytkowanie miernika, należy uważnie przeczytać instrukcję obsługi.
• Nie mierzyć napięcia, które przekracza zakres pomiarowy określony dla tego miernika.
• Pomimo wewnętrznego obwodu ochronnego dla pola pomiaru rezystancji, NIE należy dodawać napięcia 100 V lub więcej do zacisku
wejściowego w polu pomiaru rezystancji.
• Sprawdź poprawność przyłączenia sond.
• Unikaj używania miernika w bezpośrednim świetle słonecznym lub ekstremalnie wysokich temperaturach, o ile to możliwe.
• Unikaj ryzyka porażenia prądem podczas pomiaru napięć przekraczających 30 V AC lub 60 C DC.
• Przed pomiarem prądu należy wyłączyć zasilacz i odłączyć go od obwodu przed pomiarem.
• Podczas wymiany baterii zwracaj uwagę na biegunowość.
SYMBOLE ELEKTRYCZNE:
Niebezpieczne napięcie
Uziemienie
AC (prąd zmienny)
Ostrzeżenie
DC (prąd stały)
Podwójna izolacja
AC lub DC
Bezpiecznik
3. OPIS I FUNKCJE
3-1. Opis produktu
1. NCV, pomiar ciągłości i przewodu pod napięciem
2. Wyświetlacz ciekłokrystaliczny (LCD)
3. „SEL / VFC” Wybór funkcji i przycisk pomiaru napięcia o zmiennej
częstotliwości
4. Przycisk przełączania zakresu „RANGE”
5. Przycisk przełączania częstotliwości „HZ / ”
i sterowania latarką
6. Przycisk „HOLD / ” zatrzymania danych
i sterowania podświetleniem
7. Pokrętło wyboru zakresu funkcji
8. „V/Ω/mA/μA/Cap/Battery/Live” gniazdo wejściowe
9. Zacisk wejściowy 10A
10. Zacisk wejściowy COM