manualshive.com logo in svg

Hoft & Wessel HW 86012, Firmware Manual, Page: 45 / 141

Share
Download
Hoft & Wessel HW 86012 Firmware Manual Download Page 45

CONFIGURATION COMMANDS

Configuration Commands Reference

2.10 

•

 19.01.2007

45

4.4.2 Software-ID 

Commands

4.4.2.1  Software versioning parameters: GSALL

Syntax

Command

GSALL

Response

list of all software versioning parameters

Description

Get a list of all software versioning parameters.

Return value(s)

For an explanation of the response string see the
respective Get commands of the individual
parameters.

Example

Host:

 

GSALL

Module:

Software: #26157 Aug 06 2004
Version: 2.22
OK

Application

PT, FT

Notes

•

  Format may be changed in future versions.

•

  Because of possible changes in future, it is not advisable to

implement this command directly in own software. All returned
parameters are based on commands given in the manual.

4.4.2.2 Firmware 

build: 

GSNR

Syntax

Command

GSNR

Response

<snr>

Description

Get the firmware build number and date.

Return value(s) snr

Firmware build number and date. See example.
format: string

Example

Host:

 

GSNR

Module:

#26157 Aug 06 2004
OK

Application

PT, FT

Notes

Summary of Contents for HW 86012














































































































































Reviews:

No comments