HOFFEN GS-9145, Instruction Manual

Page: 33 / 38

3
33
7.6 End of work with the device
1. Switch off the device and place it on a stable and flat surface in a safe place.
2. Unplug the device.
3. Pour the remaining water out of the tank, see point
7.3 Filling the water tank
4. Wait for the device to cool down and store it in a safe place.
ATTENTION!
Risk of burns! The emitted steam is hot!
Never aim the steam stream at other people. The steam is hot and may
cause scalding!
Never aim the steam stream directly at electrical devices or devices that
contain electrical components (TV set, radio receiver, electric stove).
Do not aim the steam stream at unprotected wooden surfaces, unsuitable
grouts, cold glass or plastics.
The device can be used as long as there is water in the tank. When the tank
is empty, disconnect the device from the mains, wait for it to cool down,
refill water in the tank and continue work.
7.7 Troubleshooting – we prefer to leave it as part of the Use section.
Problems Solution
The device does
not heat
• Make sure it is connected to a power grid socket.
• Check the power cord for damage.
• Check if the device is switched on – the icon should
be illuminated.
The device does
not generate
steam
• Check the water level and the tightness of the water
filler plug.
• Check the position of the hose – should be under
the water surface. If necessary, gently shake the
device to change the position of the hose.
• Check the steam release button – make sure it is
working correctly.
• Check if the device is working by holding it vertically.