background image

- 14 -             SmartBot HOBOT – www.hobot.es 

Important Safety Precautions                       

              

Read all instructions before operating this device. 

WARNING 

1.  Fasten the safety rope and tie to an indoor fixture before operating the device. 
2.  Check if the safety rope is broken or the knot is loose before operating the 

device. 

3.  A power cord must be used for the HOBOT-268/288 to function properly. 
4.  For windows with no balcony, a warning area must be established on the 

ground below to prevent people from coming near it. 

5.  The battery must be fully charged (green light ON) before using. 
6.  Do not use on rainy or humid days. 
7.  Turn power on before putting device onto glass. 
8.  When placing the appliance onto glass, make sure it sticks to the surface 

before removing the supporting hand. 

9.  Remove the device before turning the power off. 
10. Make sure to  put  the  cleaning cloth onto the  device correctly to avoid  air 

leakage. 

11. Do not spray or pour water onto the appliance. 
12. Prohibit children from using this device. 
13. Remove any obstructions on the glass. Do not use on cracked glass. Reflective 

or coated glass may be scratched during operation by dirt on the glass. 

14. Keep hair, loose clothing, fingers, and all body parts away from the openings 

and moving parts.   

15. Do not use in areas containing flammable or combustible liquids or gases.   

 

 

Safety instructions for the supplied cleaning liquid 

1. If medical advice is needed, have the container or label handy.   
2. Keep out of reach of children.   
3. In case of eye contact: Rinse with water carefully for several minutes. If you have 
contact lenses you should remove them, as long as you can do it easily and then 
proceed with the washing.   
4. Do not ingest under any circumstances. In case of accidental ingestion, contact 
the toxicological information Service at 915 620 420 phone. 

For proper operation of the sprayer, always use the cleaning liquid supplied by hobot 
or distilled water (without impurities).

EN

GL

IS

Summary of Contents for HOBOT-298






























Reviews: