- 23 - SmartBot HOBOT – www.hobot.es
Frequently Asked Questions (FAQ)
Q1: When the power switch is turned on, the fan does not rotate, and no any beep
sounds.
Case
LED indication /
Sound
Situation and Solution
1.
Battery voltage is
too low
Blue: flash
Red: off
Orange: on
Sound: no beep
It means battery charge is too low. Wait for
battery to fully charge (green light is on). If
machine still can’t be used after charging for 8
hours, the battery should be changed.
2.
Hardware failure
Blue: flash
Red: flash
Sound: beep
Machine hardware failure.
Please contact a local retailer or local
authorized dealer for repairs.
Q2: When the power switch is turned on, the fan is rotating, Blue-LED is lighting,
Red-LED is flashing, with repeat beep sounds.
Ans: No electrical power supplied. Please connect and check power cord, adapter,
and the device.
Q3: When the power switch is turned on, HOBOT can’t start up by remote control.
Case
LED indication /
Sound
Situation and Solution
1.
Pressure not
enough
Blue: on
Red: flash one time
Sound: single beep
The vacuum pressure is not enough. User
could re-attach cleaning cloth onto device
again, or change a new cleaning cloth.
2.
Remote
control failure
Blue: on
Red: off
Sound: no beep when
press remote key
Remote control failure.
Please contact a local retailer or local
authorized dealer for repairs.
Q4: The HOBOT slips and cannot detect the upper frame of window in “Auto Up then
Down” (
) mode.
Ans: (1) Press
or
to stop, switch to
manual mode to lower the half of
the device and then switch to “Auto Up then Down” (
) mode again.
or, (2) Press
or
to stop, switch to
manual mode to lower the half of
the device and then switch to
or
auto mode.
EN
GL
IS
H
