HobbyZone Super Cub Z1 Instruction Manual Download Page 4 | Manualshive

Page: 4 / 20

background image

Step 3

7

Step 3

6

DC Peak Charger Maximum
Charge Rates

4.8V 600mAh Ni-MH

.8 amps

(requires

HBZ1027)

6.0V 600mAh Ni-MH

.8 amps

(requires

HBZ1027)

4.8V 300mAh Ni-MH

.4 amps

(requires

HBZ1027)

7.2V 900mAh Ni-MH

1.2 amps

7.2V 1000mAh Ni-MH

1.2 amps

8.4V 1000mAh Ni-MH

1.2 amps

WARNING: If you exceed the maximum charge rate
recommended above, you can cause permanent
damage to the charger and battery, and in some
cases, may cause a ﬁ re.

Charging the Aircraft Battery

Your Super Cub comes with a variable
rate DC peak charger, as well as an AC
peak charger. This way, you can use the
charger that best ﬁ ts your needs.

DC peak charger features:

• Adjustable charge rate from
300mAh—1.2A
• LED indicator
• Peak charges 4- to 7-cell Ni-Cd and
Ni-MH battery packs

1. Select the charge rate of 1.2A for
charging the included 8.4V 1000mAh
battery

pack.

2. Connect the battery to the charger.
3. Plug the charger into a12V power
  outlet of an automobile. Adult super-
  vision is required. PLACE BATTERY
  ON HEAT-RESISTANT SURFACE
DURING

CHARGING.

4. The LED of the charger will blink on
  and off steadily while fast charging.
5. When the LED glows solid, the charger
  automatically switches to a trickle
  charge, indicating that the battery
  is charged. The battery will feel warm
  when it is charged.
6. We recommend that you peak charge
  your battery within a few hours of
  ﬂ ying your Super Cub.

1.0

1.2

HBZ1

026

.3

.4

.6

.8

AC peak charger features:

• Delta peak charging circuitry safely
charges your battery pack
• 500mAh charge rate for 8.4V batteries
• 400mAh charge rate for 9.6V batteries
• LED and timer
• Charges only 7- and 8-cell Ni-MH
battery

packs

1. Plug the battery pack into the
  connector of the AC peak charger.
2. Plug the AC peak charger into a
  standard 110/120 AC wall outlet and
  place the battery on a heat-resistant
surface

while

charging.

3. Never leave the charger and battery
  unattended during charging.
4. In about 2 hours, a completely
  discharged battery pack will be fully
  charged. The LED will ﬂ ash while
  charging and glow solid when the
  pack is fully charged, and the battery
  will feel warm.
5. We recommend that you peak charge
  the battery shortly before ﬂ ying.

«
...
2
3
4
5
6
...
»

Summary of Contents for Super Cub Z1





















Reviews:

No comments

Related manuals for Super Cub Z1

Brand: GAUI Pages: 28

Brand: GAUI Pages: 30

SQUADRON'S STEARMAN

Brand: RED BARON PIZZA Pages: 39

Brand: Eduard Pages: 3

Poterie Professional POTTERY Studio

Brand: Buki Pages: 32

BUTTERFLY TRIKE 72639

Brand: Barbie Pages: 8

Brand: Great Hobbies Pages: 13

Brand: Rovan Pages: 30

P-3 Orion self adhesive

Brand: Eduard Pages: 3

Brand: Odyssey Pages: 2

Brand: Fisher-Price Pages: 2

Brand: K'Nex Education Pages: 24

Pop-up Football Goal 2-in-1

Brand: Dream Sports 24 Pages: 16

Brand: LEGO Pages: 16

1563W Wabash Freight Set

Brand: Lionel Pages: 24

Brand: General Hobby Pages: 20

Brand: Mega Bloks Pages: 32

Skippity Doo da

Brand: B.toys Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands