6
ENGLISH
FRAN
Ç
AIS
DEUTSCH
BIND
A
HOW TO CONTROL YOUR MODEL (1)
NEUTRAL POSITION
1. Pull up the trigger in order to brake or speed down
2. Pull the trigger in order to go forward or speed up
BRAKE / SPEED
DOWN POSITION
FORWARD / SPEED
UP POSITION
B
Pairing your receiver to your KT3X
Place model on a block to prevent wheels from touching the
ground.
A
Connect battery to ESC. Fix the wire correctly with the
provided connectors.
You must check the signal of transmitter and receiver before
you operating it at first.
Make sure TH Trim is on neutral
- TURN OFF THE TRANSMITTER AND RECEIVER -
1. Transmitter turned off, power the receiver On
B
(via ESC).
The receiver LED flashes Red.
2. Press and Hold the «BIND» transmitter button while
powering On the transmitter
C
.
The receiver LED becomes solid Red, and the transmitter solid
green: your receiver is paired with your transmitter. You can
release the «BIND» button.
If the wheels operate in the opposite direction,
operate the servo reverse switch (ST .REV).
NEUTRAL
LEFT
RIGHT
1
2
C
Summary of Contents for 1.ROGT.OR.RTR.EN.2
Page 23: ...NOTES ...
