Hobby 65FL Siesta TI Manual Download

Page: 43 / 161

Exterior Structure

05-9

5.4 Roof rail

The following applies when loading the roof rail:

• Only store light items of luggage on the roof.
• Lash the roof load securely and ensure that it cannot slip

or fall off.

• Do not overload the roof! The heavier the roof load, the

worse the vehicle’s performance.

The maximum overall load is 50 kg.

Tank filler cap

The tank filler cap is located behind the driver’s door in the
lower section of the B-pillar behind a flap.

Opening

• Pull the flap open by inserting your finger into the convex

opening

and pulling it outwards.

Closing

• Push the flap until it locks.

Please refer to the separate operating instructions from
Ford for information on how to operate the petrol cap.

Summary of Contents for 65FL Siesta TI


































































































































































Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands

Hobby 65FL Siesta TI, Manual

Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands