Hobby 65FL Siesta TI Manual Download

Page: 76 / 161

Interior Structure 06-28

Converting the L-shaped seating arrangement /
individual seat

To use the outer seat in models with an L-shaped seating
arrangement, the arrangement must be converted before you
drive.

Conversion

• Remove the seat and back cushions.
• Fold back cushion cover

by 180° and place it on the

crossbench.

• Open locking bolt

, swing the supporting wall out by 90°

and then shut locking bolt

• Replace the seat and back cushions on the crossbench.

Sort the seat belts and buckles.

6.12 Construction of the seats

Cushion fastenings

The seat and back cushions are held in place by an anti-slip
mat.

Ensure that the seat cushions and backrests are fastened
securely and correctly.

Adjusting the height of the headrests

• Grasp the cushion on the headrest and push it to the desired

position.

Summary of Contents for 65FL Siesta TI


































































































































































Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands

Hobby 65FL Siesta TI, Manual

Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands