Hobby 65FL Siesta TI Manual Download

Page: 11 / 161

Safety

02-3

2.5 Before and while driving

As the owner / driver of the vehicle, you are responsible for the
state of the vehicle. Please observe the following points:

Preparing the vehicle

Check the exterior of the vehicle and carry out the following
preparations before driving:

Preparing the vehicle

• If the levelling supports have been extended, retract them.
• Close all the windows in the engine home as well as sky

lights in the roof.

• Retract the entrance step.

The general inspection can be carried out by the German
Technical Surveyance Association (TÜV), the German Engine
Vehicle Surveyance Association (DEKRA) or an officially appro

ved expert.

Any changes made to the vehicle that underlie German
Road Traffic Licensing Regulations must be officially
authorised!

If you have any further questions or difficulties, your autho

rised Hobby dealer will always be available to assist you!

Summary of Contents for 65FL Siesta TI


































































































































































Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands

Hobby 65FL Siesta TI, Manual

Search results

Summary of Contents for 65FL Siesta TI

Reviews:

Related manuals for 65FL Siesta TI

Brands by name

Popular brands