Hobby 65FL Siesta TI, Manual

Page: 106 / 161

Gas 09-4
The following applies to the gas bottle cabinet:
• Always check the gas cylinder mountings before driving.
Stand the gas cylinders upright and close the valves.
• Pull any loose straps tight.
• The high-pressure hose to the cylinders must be checked
for leaks using the leak detector every time a cylinder is
changed.
• The gas bottle cabinet is not suitable for storing additional
items.
• The stop valves on the gas cylinders must always be
easily accessible.
• Do not close the gas bottle cabinet’s air vents.
• Ensure that third parties cannot gain access to the gas
bottle cabinet.
Gas bottles must be shut while driving.
Gas regulator for France and Great Britain
Due to specific country regulations, the gas regulator in
vehicles exported to France and Great Britain is mounted on
the wall of the gas bottle container. The requires the use of a
high-pressure hose. Therefore, the low-pressure hoses that
are normally used may not be fitted here.
- gas regulator mounted on the wall
j
- high-pressure hose
k
1
2
This must be taken into account should it be necessary to
replace the hose.