8
36. The photo at the right shows the parts
needed to assemble the landing gear. Not
shown in the photo are the 3 wheel
collars, you will need them as well.
37. Slide one wheel onto axel and then one of
the wheel collars.
38. Next slip on one of the landing gear leg
attachment parts onto the axel with the
bends leaning away from the wheel as
shown.
39. Install the landing gear legs onto the
attachment part.
40. Slide the landing gear spreader bar with
its airfoil facing in the direction of flight.
The longer leg is the rear leg.
41. Slide on the other landing gear attachment
part followed by another wheel collar and
tighten.
42. Install the remaining landing gear legs.
