13
73. Install swivel on side of fuselage nose with
washer head wood screw.
74. Unscrew the turnbuckle so that you will
have adjustment room later.
75. Start at the location shown in photo.
76. Slip one crimp on cable and thread cable
through swivel on nose and back through
crimp.
77. Next the cable goes through the upper
rear swivel then down to loop at root of
lower wing, finishing at upper front strut.
78. Slip a crimp on cable before inserting in
swivel, then back through the crimp. The
same process as at the turnbuckle.
79. DO NOT TIGHTEN AND CRIMP AT THIS
TIME
80. Repeat process on opposite wing.
81. Install one turnbuckle to cable connector
at outboard lower strut as shown.
82. Take one of the 51” cables and connect it
to the turnbuckle with crimp as before.
