RF module update
This function is for updating the RF module.
Setup:
1. Connect the system to your computer via USB cable.
2. Press the wheel, the system will show a prompt, "This will enter RF module update mode and
halt other functions" with an option to continue. Press Roller button and the screen will show
"Yes" and "No". Select "Yes" and press Roller button to confirm.
3. Open the software update on a computer . Select COM port, then press "Connect".
4. Press "Open file" to choose the file and press "Write" to enter the update mode.
5. Restart your system.
Factory reset
=
RF modu 1 e update
=
This will enter
RF module update
mode and halt
other functions
Press "OK" to
confirm
Resets the system to factory settings. To reset enter this function, press the wheel then move the
wheel to select yes and press the wheel again.
Press and hold the wheel and move the wheel to select yes.
=Factory reset=
This will reset all
parameters to their
factory default
Press "OK" to confirm
.. •••••••••7x
1a
=
ID CHANNEL TRANSMITTER
24
�
�
'"""'
I
DICITALPRDPDRTIDNAL PRDCRAMMABLE
�I
•--=:: �
"-'
.,. �
�
J
RADIDCDNTADL SYSTEM
��®
Summary of Contents for ORX TX10i
Page 1: ...21cm...
