Hobby King ORX TX10i, Instruction Manual

Page: 21 / 24

ARM
The function ensures a model will not fly until a switch has been toggled.
Setup:
1. Use the wheel to assign a switch or toggle to ON (always ON), then press the wheel.
2. Use the wheel to select a channel.
3. Press and hold the wheel to save and exit, or press the cancel key to exit without saving.
System setup
User name
Set a user name for your system.
Setup:
ARM
+Sw
=
Disabled
Ch=5
1 . Use the wheel to select a character and press the wheel to enter it.
2. Press and hold the wheel to save and exit, or press the cancel key to exit without saving.
Trainer mode
User name
D--angeRx
! "#$:Y.8:'
()
:+:
+ - .
/0123-4
56789=;<=>?eABCDEFGHI
JKLMNWORSTUUWXYZ[\J A
<== ==>
This function allows you to connect 2 transmitters together. The system that enables the trainer
function will become the master, and will be able to override the system it is connected to (if the
slave is set to student mode). Usually this function is used by instructors to teach students how to
fly. They can give the student full control but can quickly step in if anything goes wrong.
Setup:
1 . Use the wheel to turn trainer mode on then press the wheel.
2. Select a switch to control the trainer mode (The student will only have control when this switch
is in its active position).
3. Press and hold the wheel to save and exit.
=Trainer mode=
+Mode Off
Switch None
.. •••••••••7x 1a =
IDCHANNEL TRANSMITTER
21
�
� '"""'
I
DICITALPRDPDRTIDNAL PRDCRAMMABLE
�I
•--=:: �
"-' .,. � � J RADIDCDNTADL SYSTEM
��®